| dc.contributor.author |
Li, D |
en |
| dc.contributor.author |
Brantley, W |
en |
| dc.contributor.author |
Mitchell, J |
en |
| dc.contributor.author |
Daehn, G |
en |
| dc.contributor.author |
Monaghan, P |
en |
| dc.contributor.author |
Papazoglou, E |
en |
| dc.date.accessioned |
2014-06-06T06:44:54Z |
|
| dc.date.available |
2014-06-06T06:44:54Z |
|
| dc.date.issued |
2002 |
en |
| dc.identifier.uri |
http://dx.doi.org/10.1023/A:1014332416832 |
en |
| dc.identifier.uri |
http://62.217.125.90/xmlui/handle/123456789/2143 |
|
| dc.subject |
Microstructures |
en |
| dc.subject |
Room Temperature |
en |
| dc.subject |
Scanning Electron Microscope |
en |
| dc.subject |
Tensile Test |
en |
| dc.subject |
Yield Strength |
en |
| dc.subject |
Heat Treatment |
en |
| dc.title |
Fatigue studies of high-palladium dental casting alloys: Part I. Fatigue limits and fracture characteristics |
en |
| heal.type |
journalArticle |
en |
| heal.identifier.primary |
10.1023/A:1014332416832 |
en |
| heal.publicationDate |
2002 |
en |
| heal.abstract |
The fatigue limits and fracture characteristics for a Pd–Cu–Ga alloy and a Pd–Ga alloy were studied. The alloys were cast into tensile test bars with gauge diameter of 3 mm and gauge length of 15 mm, and the surfaces of the castings were neither air-abraded nor polished after removal from the investment. Specimens were prepared from all-new metal (not previously |
en |
| heal.journalName |
Journal of Materials Science-materials in Medicine |
en |
| dc.identifier.doi |
10.1023/A:1014332416832 |
en |